U-Boot 2012.04.01-00489-gcd2dac2-dirty (Jul 07 2012 - 12:57:03)

DRAM:  128 MiB
WARNING: Caches not enabled
MMC:   bcm2835_sdh: 0
Using default environment

In:    serial
Out:   serial
Err:   serial
Net:   Net Initialization Skipped
No ethernet found.
Hit any key to stop autoboot:  0 
U-Boot> usb start; dhcp; tftp 100 %C; go 8000
(Re)start USB...
USB:   Core Release: 2.80a
scanning bus for devices... 3 USB Device(s) found
       scanning bus for storage devices... 0 Storage Device(s) found
       scanning bus for ethernet devices... 1 Ethernet Device(s) found
Waiting for Ethernet connection... done.
BOOTP broadcast 1
DHCP client bound to address 192.168.0.195
Using sms0 device
TFTP from server 192.168.0.110; our IP address is 192.168.0.195
Filename '/arm/9picpu'.
Load address: 0x8000
Loading: #################################################################
         #################################################################
         #######################
done
Bytes transferred = 2055890 (1f5ed2 hex)
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.0.110; our IP address is 192.168.0.195
Filename '%C'.
Load address: 0x100
Loading: #
done
Bytes transferred = 102 (66 hex)
## Starting application at 0x00008000 ...

Plan 9 from Bell Labs
firmware: rev 912
cpu0: 700MHz ARM1176JZF-S
fp: 16 registers,  simd
fp: arm arch VFPv2; rev 5
eMMC external clock 100 Mhz
#l0: usb: 100Mbps port 0x0 irq -1: 000000000000
#u/usb/ep1.0: dwcotg: port 0X0 irq 9
128M memory: 28M kernel data, 100M user, 479M swap
usb/hub... usb/ether... 
etherusb smsc: b827eb754565
version...time...

init: starting /bin/rc
magnesium#